Best EH-Rated Work Boots for Electricians: Three Options Compared

Short answer: read the EH line, the toe, and the "dry" wording

On a boot's maker page, check three things: an EH line, a composite or other non-metallic toe if you want one, and the dry-conditions wording you will plan your work around. Wolverine's Overpass, Irish Setter's Kasota and Timberland PRO's Boondock 6-inch composite toe each list EH and a composite or non-metallic toe in their Amazon listings' feature bullets and on their makers' pages. Timberland and Carhartt both describe EH as secondary protection, so treat it as a supplement to your site's electrical safety procedures, not a replacement for them.

Updated October 2026

How this guide was built

We did not test these boots ourselves; this guide is built from the manufacturers' published specifications and Amazon's product listings.

Wolverine, Irish Setter and Timberland each publish a page for the boot described below. The Amazon titles are short, but each listing's feature bullets name the toe and the EH protection; where a detail comes only from the maker's page, the section says so, and the label on the pair you receive is the final word.

What EH means, in the makers' words

• Timberland PRO: its technology glossary says Electric Hazard "provides secondary underfoot protection against live electrical circuits, electrically energized conductors, parts or apparatus less than 600 volts."
• Carhartt: "Electrical Hazard (EH) footwear provides secondary protection against accidental contact with live circuits in dry conditions."
• Wolverine: its technology page says "Special EH construction helps protect the wearer from electrical current on dry surfaces."
• KEEN: EH-rated boots "offer a secondary source of protection when an outsole accidentally comes into contact with a live electrical circuit."

Three takeaways follow, and they are our reading of those lines rather than a maker claim. First, "secondary" means a backup, not a guarantee. Second, two of the four wordings tie the protection to dry conditions, and none says it holds when the sole is wet. Third, Timberland says "underfoot" and KEEN says "outsole," which points at the sole rather than the toe cap, so toe material and EH are separate questions.

That separation shows on the pages. Red Wing's testing page lists electrical hazard as its own category alongside toe impact and compression, Timberland lists EH on its steel-toe Pit Boss as well as on its composite-toe Boondock, and Carhartt lists it on a soft-toe boot. So read the EH line itself instead of assuming it from the toe.

EH is also a different rating from static dissipation. Timberland's glossary says its SD 10 and SD 35 footwear "protects equipment by dissipating static electricity to the walking surface while providing the wearer limited protection against electric shock," and KEEN advises that around live circuits you should "look for" EH-rated footwear and keep ESD for sensitive manufacturing settings.

What the makers say about non-metallic toes and electrical work

What the makers say about composite and non-metallic toes:

• Wolverine's technology page describes CarbonMAX as a safety toe that is "lightweight, non-conductive to electricity and resists extreme cold and heat," and composite toes as "non-conductive to heat or cold."
• Timberland's guide says composite toes are "non-metallic, non-magnetic," and that they "provide excellent electrical hazard protection for electricians, utility workers, or people who work near live wires." Timberland's product pages list the composite toe and the EH protection as separate badges.
• Red Wing's guide lists "Electricians & engineers" under composite toes and says "If you're working in cold conditions or around electricity, composite toe is ideal." It also says that while composite toes meet ASTM safety standards, they "may not be as strong as steel toe boots in extreme impact scenarios," and advises that "Some industries require specific safety standards—always check with your employer before purchasing."

If you also work around heavy falling or rolling loads, the extreme-impact caveat and the employer-check line are both worth a conversation with whoever sets the PPE rules on your site.

The three boots side by side

The toe and EH rows match each Amazon listing; the other rows come from the makers' pages, and Wolverine's page is for the Overpass CarbonMAX version, which the Amazon listing does not name. All three maker pages list a non-steel shank, nylon or fiberglass. Whether the eyelets and hooks are metal is not stated on any of them.

Wolverine Overpass: composite toe and EH on the listing

The Wolverine Overpass Composite Toe Waterproof Work Boot lists "Composite Toe ASTM F2413-11 M I/75 C/75 EH" in its Amazon feature bullets, along with premium waterproof leather with an abrasion-resistant toe and contour welt construction. Wolverine's page for the Overpass CarbonMAX 6-inch boot (style W080167) adds a moisture-wicking mesh lining, a removable OrthoLite footbed, a PU midsole and a nylon shank. Neither lists a slip rating.

Confirm the model. The Amazon listing does not say CarbonMAX, and it cites the F2413-11 edition of the standard where Wolverine's CarbonMAX page cites F2413-18, so the lining, footbed, midsole and shank details may belong to a newer version. The EH line is on the listing itself; check the label on the pair you receive.

Irish Setter Kasota: the BOA dial option

The Irish Setter Kasota 6 Inch Non-Metallic Toe Work Boot is the one built around a BOA dial: its Amazon listing names the BOA Fit System, a non-metallic safety toe and electrical hazard resistance. Irish Setter's page for style 83658 says the BOA Fit System "lets you find a custom fit with the turn of the dial and release it just as quickly," and its spec table lists a non-metallic toe, full grain waterproof leather with the UltraDry waterproofing system, direct-attach construction, a removable memory foam-EVA footbed, a nylon shank and a TriTek outsole. The ASTM line reads "ASTM F2413-24, I/C, EH SRO," and the page also shows Electrical Hazard and slip-resistance badges. It lists the weight as 3 lbs. 6 oz. and the boot as not resoleable.

Confirm the option. The listing's default option reads "Waterproof, Uninsulated, BOA Fit System." Irish Setter also sells other 6-inch Kasota styles, including 83644 (Metguard) and 83636 (side-zip), so check the option you select before you buy.

Timberland PRO Boondock 6 inch composite toe: what Timberland calls heavy-duty

The Timberland PRO Boondock 6 Inch Composite Toe Waterproof is the one Timberland calls heavy-duty. Its page for the uninsulated style describes "heavy-duty Boondock manufacturing boots" with an asymmetrical composite safety toe, a waterproof membrane, electric hazard protection, a fiberglass shank, an all-weather TPU outsole that it calls heat-, slip-, oil- and abrasion-resistant, an Anti-Fatigue Technology footbed, a rigid external heel cup, a Slip-Resistant (SR) badge and three-quarter Goodyear welt/cement heel construction.

Confirm the version. This Amazon listing is the uninsulated Boondock, and its feature bullets list the composite safety toe, the waterproof membrane and electrical hazard protection. Timberland sells an insulated Boondock with 400 grams of insulation as a separate listing.

Best for

A starting point drawn from the maker pages, not a ranking.

Before you buy

1. Match the option. Each listing offers more than one size or style option, so confirm the toe and the EH line on the option you select.
2. Read the label. The rating on the boot you receive is the one that counts, and Red Wing's own testing page says to "check your specific style to see which safety standards it meets."
3. Ask your employer. Site rules decide what footwear is acceptable.
4. Keep it dry. Two makers tie EH protection to dry conditions, so plan around that.

Sources

Pages behind the ratings and quotes above, checked October 2026:

• Wolverine: "Overpass CarbonMAX® 6" Boot" (product page, style W080167)
• Wolverine: "Technology" (technology page)
• Irish Setter: "Kasota" (product page, style 83658)
• Timberland: "Men’s Boondock 6-In Comp-Toe Waterproof Work Boots - Brown" (product page, style TB192615214)
• Timberland: "Men's Boondock 6" Composite Toe Waterproof Work Boot" (product page, style TB192641214)
• Timberland: "Men's Timberland PRO® Pit Boss 6" Steel-Toe Work Boot" (product page, style TB133034214)
• Timberland PRO: "Work Boot Technology & Innovation" (technology glossary)
• Timberland PRO: "Safety Toe Boots: Composite vs Steel vs Alloy" (guide)
• Carhartt: "Waterproof 6" Moc Toe Wedge Boot" (product page, style 800037)
• Red Wing: "Safety Toe Options" and "Testing Standards" (articles)
• KEEN Footwear: "EH vs ESR vs ESD Work Footwear: What's the Difference?" (blog article)
• Amazon product listings for the three boots (titles, feature bullets and options), read October 2026